橹橹av毛片,日本乱码伦午夜福利在线,久久免费看少妇高潮a片无码特黄,国产成人精品午夜福利av免费

    1. <tbody id="1l3v4"><div id="1l3v4"><address id="1l3v4"></address></div></tbody>

        1. <menuitem id="1l3v4"><optgroup id="1l3v4"></optgroup></menuitem>

          <option id="1l3v4"><span id="1l3v4"></span></option>
          1920_300px;
          產品
          當前位置:首頁>產品>產品中心
          CQZ型磁力驅動化工流程泵 CQZ Magnetic Drive Chemical Engineering Process Pump
          作者:蘭州海蘭德泵業有限公司 來源:蘭州海蘭德泵業有限公司 更新于:2022/8/13 9:52:55 閱讀:

          CQZ型磁力驅動化工流程泵
          CQZ Magnetic Drive Chemical Engineering Process Pump

            CQZ型泵為單級單吸臥式磁力驅動化工流程泵,其尺寸和性能符合ISO2858,是替代IH、CZ系列化工泵的理想產品。該型泵吸收國內外同類產品先進技術,結合實際應用,依照ISO15783國際標準和GB/T25140國家標準,參照美國石油學會API685及其相關標準設計制造,具有全密封、無泄漏、無污染,效率高,結構安全可靠,運轉穩定等特點,可廣泛應用于石油化工、煤化工、氯堿、冶金、電力、造紙、環保等行業。
          CQZ型泵通過內外磁轉子進行耦合傳動,隔離套將內磁轉子密封在泵腔內,運用磁力驅動技術,解決了化工流程中易散性物料的輸送問題。
            本產品適宜輸送不含固體顆粒的介質和不允許密封材料污染的場合。
            除非能有效排除鐵磁性微粒,否則本產品應避免輸送含有鐵磁性物料的液體。
          CQZ pump is a single stage, single suction horizontal magnetic drive chemical engineering process pump, the dimensions and performance of which meet ISO2858, being an ideal product that can replace IH and CZ series chemical engineering pumps. This pump model adopts advanced technology of similar products home and abroad, is combined with actual applications, and has been designed and manufactured according to international standard ISO15783 and Chinese national standard GB/T25140, by referencing API685 standard and other relevant standards. It features full sealing, no leakage, no pollution, high efficiency, high structural safety and reliability, and stable operation etc. It can be widely used for petrochemical engineering, coal chemical engineering, chlorine alkali industry, metallurgy, electric power, paper making, and environmental protection industry etc.
          CQZ pump is driven by coupled internal and external magnetic rotors. An isolation sleeve seals the internal magnetic rotor inside the pump cavity. Magnetic drive technology has been used, solving the problem of conveying easily scattered material in chemical engineering  process.
          This product is applicable to conveying media not containing solid particles and occasions where contamination of sealing material is not permitted.
          Except ferromagnetic particles can be effectively removed, use of this product to convey liquid containing ferromagnetic material shall be avoided.
          結構說明 Description of structure
          1.該系列泵均為單級、單吸、臥式懸臂式(OH1型)離心泵;
          2.泵為軸向水平吸入,徑向垂直排出;
          3.泵的型譜范圍寬,可供選擇的產品性能參數廣泛。
          4.優化的水力模型設計,具有較高的水力效率葉輪的抗汽蝕設計,汽蝕余量低、設備運行可靠。
          5.泵體為蝸殼式、徑向剖分,具有底腳支撐(CQZ型)和中心支撐(CQZH型)兩種形式;
          6.葉輪為整體鑄造閉式結構,采用背葉片或密封環與平衡孔組合結構平衡軸向力;
          7.通過泵送工藝液體自循環和外接液體強制循環等多種循環方式將泵內產生的渦流熱和摩擦熱帶走,以滿足不同工況介質的輸送。
          8. 因結晶、汽化等工況需要時,可帶冷卻或保溫夾套。
          9.優化的剛性軸結構設計,具有更佳的撓度指數,使泵的振動值進一步降低。
          10.內置滑動軸承采用了大厚度、重載、強推力陶瓷軸承,選用高純度、高耐磨性的碳化硅材料,使用壽命長。
          11.內外磁轉子均為全密封式結構,防止泵在腐蝕環境下磁體腐蝕和磁性能的衰退。
          12.滾動軸承采用稀油潤滑,其油位由油標和油杯同時控制,油杯能自動補償油位;
          13.采用了加長撓性膜片式聯軸器部件,檢修時不必拆卸吸入和吐出管路就能拆出葉輪、軸等零部件;
          14.泵和電機安裝在同一個公用底座上。
          15.法蘭標準可提供ANSI、HG/T20615、HG/T20592等多種選擇。
          16.可配帶普通電機、防爆電機、直流電機和永磁電機等。
          1. This series pumps are all single stage, single suction, horizontal cantilever (type OH1) centrifugal pumps.
          2. These pumps adopt axial horizontal suction and radial vertical discharge.
          3. These pumps have wide model spectrum range and many product performance parameters that can be selected.
          4. Optimized hydraulic model design and anti-cavitation design of impeller with relatively high hydraulic efficiency allow low cavitation margin and reliable equipment reliability.
          5. Pump body adopts volute type, radial splitting, and bottom feet support (CQZ) or central support (CQZH).
          6. The impeller adopts a closed structure of integral casting, and a structure combining rear blade or seal ring with balance hole to balance axial force.
          7. Eddy flow heat and friction heat generated in the pump is taken away by various circulation modes, e.g. pumped process liquid self-circulation and forced circulation of externally connected liquid, to satisfy conveying of media under different operating conditions.
          8. Cooling or thermal insulation jacket can be provided if required by operating condition such as crystallization or evaporation.
          9. Optimized rigid shaft structural design provides better deflection index, further reducing pump vibration.
          10. Internal sliding bearing adopts thick, heavy duty, strong thrust ceramic bearing, and high purity, high wear resistance silicon carbide material, thus allowing long service life.
          11. Both internal and external magnetic rotors adopt fully sealed structure, thus preventing pump magnet corrosion in corrosive environment and deterioration of magnetism.
          12. Roller bearing is lubricated by oil, with the oil level controlled by both oil gauge and oil cup. This oil cup can automatically compensate the oil level.
          13. Lengthened flexible membrane type coupling is adopted. For maintenance, parts such as impeller and shaft etc. can be removed without dismantling the suction pipeline or discharge pipeline.
          14. The pump and the motor are installed on the same pedestal.
          15. Flange standard may be ANSI, HG/T20615, or HG/T20592.
          16. ordinary motor, explosionproof motor, DC motor, or permanent magnet motor etc. can be used.
          性能范圍Scope of performance
          流量Flow    1.5~800m?/h
          揚程Head    6~160m
          工作溫度Operating temperature (t):    -45℃~+300℃
          標準轉速Standard rotation speed (n): 2900r/min, 1450r/min
          法蘭壓力等級Flange pressure rating: 2.5MPa
          型號意義Type denotation 






          Copyrights ©  版權所有:蘭州海蘭德泵業有限公司 隴ICP備10002898號 設計制作 宏點網絡
          公安備案甘公網安備 62010502000236號
          300_200px;
          橹橹av毛片,日本乱码伦午夜福利在线,久久免费看少妇高潮a片无码特黄,国产成人精品午夜福利av免费