橹橹av毛片,日本乱码伦午夜福利在线,久久免费看少妇高潮a片无码特黄,国产成人精品午夜福利av免费

    1. <tbody id="1l3v4"><div id="1l3v4"><address id="1l3v4"></address></div></tbody>

        1. <menuitem id="1l3v4"><optgroup id="1l3v4"></optgroup></menuitem>

          <option id="1l3v4"><span id="1l3v4"></span></option>
          1920_300px;
          產品
          當前位置:首頁>產品>產品中心
          MZ磁力驅動自吸泵 MZ Magnetic Driven Self-Priming Pump
          作者:蘭州海蘭德泵業有限公司 來源:海蘭德 更新于:2022/8/15 9:25:55 閱讀:

          MZ磁力驅動自吸泵
          MZ Magnetic Driven Self-Priming Pump

            MZ型磁力驅動自吸泵,主要是為容器和槽車卸載而設計的,用于液槽抽排、罐車卸貨,確保排出進口管路中的空氣迅速引液,可供輸送液態烴、汽油、煤油、柴油等石油產品和化工、制藥等行業易燃易爆、有毒有害的液體,尤其適用于船用油泵和陸地油庫、油罐車的裝卸用泵。
          MZ magnetic driven self-priming pump is designed mainly for unloading vessels and tanker cars, to ensure quick priming by removing the air in the inlet and discharge piping; it can convey petrochemical products such as liquid hydrocarbon, gasoline, kerosene and diesel oil and inflammable and explosive, toxic and harmful liquid in chemical and pharmaceutical industries, and is especially suitable as vessel oil pump and handling pumps for onshore oil depot and oil tankers.
          結構說明  Description of structure
          1.臥式、外混式、自吸性能好。
          2.磁力驅動、全密封、無泄漏。
          3.泵體采用底腳支撐,軸向吸入、徑向排出。
          4.葉輪為閉式葉輪,軸向力主要采用背葉片平衡,殘余軸向力由滑動軸承承受。
          5.當液體在泵內循環時間較長時,為防止內部循環液的溫度升高,可設置溫控保護裝置。
          6.管路中不需安裝底閥,工作前只需保留泵體內儲有定量引液即可。
          7.后拉出式設計,可以不動進出口管路,即可維修,使用方便。
          8.可采用與電機直連或膜片式聯軸器連接的形式。
          1.Horizontal and external mixing type, with good self-priming performance.
          2.Magnetic driven, fully enclosed and leakage free.
          3.The body is supported with feet, with axial suction and radial discharge.
          4.The impeller is enclosed type; the axial load is balanced mainly with back vane, and the residual axial load is taken by sliding bearings.
          5.When liquid circulates within the pump for a long time, to prevent heating up of such circulating liquid, temperature control protection device can be provided.
          6.It is not necessary to install a bottom valve in the piping, and before operation, it is only required to have given amount of priming liquid within the pump body.
          7.It is in rear pull-out design, so maintenance can be done without involving the inlet and discharge piping, convenient in use.
          8.Either direct driving by motor or connection via diaphragm coupling can be used. 

          性能范圍   The main specifications


          流量  Capacity           1.6~400m3/h
          揚程  Head               20~125m
          介質溫度  Temperature   -20℃~+120℃
          進口直徑  Import diameter  25~200mm
          最大工作壓力 The max working pressure 1.6MPa

          型號意義 Type denotation






          泵常用材料 Common pump materials




          標準性能表 Standard performance table





          Copyrights ©  版權所有:蘭州海蘭德泵業有限公司 隴ICP備10002898號 設計制作 宏點網絡
          公安備案甘公網安備 62010502000236號
          300_200px;
          橹橹av毛片,日本乱码伦午夜福利在线,久久免费看少妇高潮a片无码特黄,国产成人精品午夜福利av免费