橹橹av毛片,日本乱码伦午夜福利在线,久久免费看少妇高潮a片无码特黄,国产成人精品午夜福利av免费

    1. <tbody id="1l3v4"><div id="1l3v4"><address id="1l3v4"></address></div></tbody>

        1. <menuitem id="1l3v4"><optgroup id="1l3v4"></optgroup></menuitem>

          <option id="1l3v4"><span id="1l3v4"></span></option>
          1920_300px;
          產品
          當前位置:首頁>產品>產品中心
          MFY型雙殼體液氯磁力泵 MFY Magnetic Driven Submerged Liquid Chlorine Pump
          作者:蘭州海蘭德泵業有限公司 來源:海蘭德 更新于:2022/8/15 14:55:09 閱讀:

          MFY 型雙殼體液氯磁力泵

          MFY Magnetic Driven Submerged Liquid Chlorine Pump 

            MFY型雙殼體液氯磁力泵是一種液下式磁力驅動筒袋泵,廣泛應用于氯堿行業對液氯的加壓輸送、包裝及處理。采用雙層隔離套保護,不需要氮氣隔離密封,無氮氣和氯氣損耗,不會產生混合尾氣,內部可實現自動排氣,彌補了普通液氯液下泵在生產中存在的安全隱患,完全滿足液氯連續、高壓輸送和灌裝的需要。
          MFY is a submerged magnetic driven barrel pump, extensively used in pressurizing, conveying, packaging and disposing of liquid chlorine in chlor-alkali industry. Double-layer spacer sleeve protection is adopted, without the need of nitrogen isolation and sealing, no nitrogen and chlorine loss, and it produces no mixed tail gas; automatic vent can be realized within the pump, avoiding the safety hidden perils in the production with ordinary submerged pump for liquid chlorine, and fully meeting the needs in continuous conveying and filling of liquid chlorine under high pressure.

          結構說明 Description of structure
          液下式磁力驅動多級離心泵,軸向吸入、徑向剖分。
          A multi-stage magnetic driven submerged centrifugal pump, with axial suction and radial splitting.

          立式筒袋式雙層殼體結構,內層為節段式,泵的外殼承受入口壓力,外殼按壓力容器設計,外殼的長度以及泵的插入深度取決于裝置汽蝕余量要求,也可以直接安裝在儲存介質的容器上,此時不需要安裝外殼,容器即成為泵的外殼。
          It is in vertical barrel double-volute structure, the inner layer is sectional, and the outer shell withstands the suction pressure, its length and pump insertion depth depend on the NPSH requirement of the unit, it can also be directly mounted on the vessel storing the media, in this case, outer shell is not required, and the vessel can serve as the outer shell of the pump.

          特殊的首級葉輪設計技術,優秀的誘導輪技術,低轉速、低汽蝕余量、高抗汽蝕性能泵的氣蝕余量NPSHr=0.5-0.8m。
          Special first-stage impeller design technique and excellent inducing wheel technique, low speed, low NPSH and high resistance to cavitation.

          軸向力利用流體力學的平衡鼓技術自動平衡,充分保證了泵的正常啟停和滑動軸承的使用壽命。
          The axial force is automatically balanced with the balance drum technology in hydrodynamics, fully ensuring the normal start and stop of the pump and the service life of sliding bearings.
          通過磁性聯軸器驅動,所有密封點均由密封墊實現靜密封,無須干氣作為密封阻隔氣,沒有氮氣和氯氣損耗,不必安裝卸壓管及安全閥,不必配用氮氣中間罐及相應管路,完全做到無泄漏。
          It is driven via magnetic coupling, static sealing is realized with sealing packs at all points, no need for dry gas as sealing gas, therefore there is no nitrogen or chlorine loss, and it is not necessary to provide pressure relief pump and relief valve, or intermediate nitrogen tank and associated piping, completely avoiding leakage.

          隔離套材料選用高強度、高阻抗的材料,在旋轉磁場中極大的降低了磁渦流的產生,磁渦流損失小,磁傳動效率高,對介質的溫升影響小。
          Spacer is made of materials with high strength and high impedance, greatly reducing the magnetic vortex in the rotating magnetic field, therefore low magnetic vortex loss, high magnetic driving efficiency and small impact to the temperature rise of media.

          采用雙層隔離套結構,雙重靜密封,實現雙重保護,并配置液體泄漏檢測儀表,可實現泄漏報警,更加安全可靠。
          Double layer spacer structure is used with dual static sealing, realizing dual protection, and liquid leakage detection instrument is provided, to realize leakage alarm, for increased safety and reliability.

          獨特的泵的內部循環系統和泵與儲罐之間的氣相平衡系統,讓整個泵組件在邊界條件下都是安全的。
          Unique internal circulating system of the pump and the gas-phase balance system between the pump and tank, so that the whole pump is safe under boundary conditions.

          一般安裝于系統的最低位,當需要排除液氯時也比較方便和迅速,防止了液氯中NCL3聚集的安全風險。
          Normally it is installed at the lowest position of the system, and when it is necessary to remove liquid chlorine, it can be done conveniently and quickly.

          泵的內置滑動軸承選用高純度的碳化硅陶瓷復合材料,具有較高的強度、韌性及耐磨性和良好的自潤滑性能,可適應液氯在氣液混合態下近似于干運轉的工況。
          The built-in sliding bearings in the pump are made of high-purity silicon carbide ceramics composite material, featuring high strength, tenacity, wearing resistance and good self-lubrication performance, able to meet the nearly dry operation condition for liquid chlorine in the mixed status of gas and liquid.

          泵的入口尺寸采用加大設計,均在DN100以上,以降低泵與液氯儲罐之間接管的阻力損失。
          配置變頻調速電機對泵的流量及出口壓力進行調節,以給定的壓力為基點進行調整,壓力波動小,控制可靠穩定。不必安裝卸壓管及安全閥。不必配用氮氣中間罐及相應管路。 

          性能范圍 The main specifications

          流量 Flow                0~60m3/h
          揚程 Head                     30~150m
          介質溫度 Medium temperature    -45℃~+20℃
          進口直徑 Inlet dia.                100~250mm 

          最大工作壓力 Max. working pressure 2.5~4.0MPa


          型號意義Type denotation


           




          泵常用材料 Common pump materials




          標準性能表 Standard performance table





          Copyrights ©  版權所有:蘭州海蘭德泵業有限公司 隴ICP備10002898號 設計制作 宏點網絡
          公安備案甘公網安備 62010502000236號
          300_200px;
          橹橹av毛片,日本乱码伦午夜福利在线,久久免费看少妇高潮a片无码特黄,国产成人精品午夜福利av免费